SoVa Gear and Equipment
Team Modded Weapons
Betty Boop:
Pressurized Grenade filler, output 1 grenade/min
Pressurized Grenade filler, output 1 grenade/min
* Sliding breech load with a lock tab while in the firing mode
* 3/4 Rainbird valve and porting (we were not after the distance that the Sovanator has)
* Simulated blast deflector
* SP Ion regulator (I may change to a Palmers at a later date if I am unhappy with the recharge rate)
* Padded shoulder saddle
* 115psi safety pop-off valve
* On/off valve to disable the firing valve from accidental discharges
* Schader fill valve for safety testing with a standard air compressor
* 0-160psi air chamber guage
* Remote cable firing using the trigger frame off of an old Dragon TES (I LOVED that marker...and now it can be with me once again in Spirit out on the field!)
* pressure rated steel fittings (I normally use brass here, but wanted to cut back on the weight, plus it stands up better to rough handleing alittle better....and Traffic can be far from gentle with his launcher at times)
* The launcher is roughly 4.5 feet in overall length (I havent actually put a tape measure up to it yet)
* Weight is roughly (again) 10 lbs
* 3/4 Rainbird valve and porting (we were not after the distance that the Sovanator has)
* Simulated blast deflector
* SP Ion regulator (I may change to a Palmers at a later date if I am unhappy with the recharge rate)
* Padded shoulder saddle
* 115psi safety pop-off valve
* On/off valve to disable the firing valve from accidental discharges
* Schader fill valve for safety testing with a standard air compressor
* 0-160psi air chamber guage
* Remote cable firing using the trigger frame off of an old Dragon TES (I LOVED that marker...and now it can be with me once again in Spirit out on the field!)
* pressure rated steel fittings (I normally use brass here, but wanted to cut back on the weight, plus it stands up better to rough handleing alittle better....and Traffic can be far from gentle with his launcher at times)
* The launcher is roughly 4.5 feet in overall length (I havent actually put a tape measure up to it yet)
* Weight is roughly (again) 10 lbs
* Sliding Breech
* 1" Rainbird, modified
* LP High Flow Regulator
* 140/psi-rated safety tubing
* 115/psi safety pop-off valve
* On/Off valve for manual recharge and safety discharge
* Schrader Valve for safety testing
* 0-200/psi chamber gauge
* Spyder Shutter trigger frame, remote cable firing, pushbutton safety
* Secondary firing valve for non-shoulder-mounted firing
* Pressure-rated steel fittings
* Custom Quick-Release Triple dove/weaver-rails for various scopes, range-finders and add-ons
* Scopes: Bushnell 24x40 (Long Range), Crossman 4x32 (Close Range), Fast-Acquisition Sighting Tube & Lazer Range finder with personnel homing signal.
* ~ 5' in length
* Carrying handle, strap mounts
* 1" Rainbird, modified
* LP High Flow Regulator
* 140/psi-rated safety tubing
* 115/psi safety pop-off valve
* On/Off valve for manual recharge and safety discharge
* Schrader Valve for safety testing
* 0-200/psi chamber gauge
* Spyder Shutter trigger frame, remote cable firing, pushbutton safety
* Secondary firing valve for non-shoulder-mounted firing
* Pressure-rated steel fittings
* Custom Quick-Release Triple dove/weaver-rails for various scopes, range-finders and add-ons
* Scopes: Bushnell 24x40 (Long Range), Crossman 4x32 (Close Range), Fast-Acquisition Sighting Tube & Lazer Range finder with personnel homing signal.
* ~ 5' in length
* Carrying handle, strap mounts
